Racingline Carbon Fibre Rear Body Brace for VW Golf MK7 Golf MK7.5 Golf MK8 / Seat Leon MK3 /Skoda Octavia MK3
RACINGLINE
£437.68
Racingline Carbon Fibre Rear Body Brace (Supported MQB Vehicles)
Want to sharpen up your Golf 7 & 7.5 / Leon / Octavia handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. Modern cars like the MQB platform run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That’s why the Clubsport S Golf gets a factory rear brace.
- The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.
- The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis.
- By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do
- Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.
- The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible
- Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace.
Confirmed Applications
- VW Golf 7 & 7.5 2012-2020 5G
- VW Golf 7 & 7.5 GTI 2013-2020 5G
- VW Golf 7 & 7.5 R 2013-2020 5G
GOLF 7 & 7.5 WAGON/VARIANT *4Motion wagon models only
- VW Golf 8 2019+
- VW Golf 8 GTI 2020+
- VW Golf 8 R 2020+
NOTE: Leon & Octavia models require the rear boot carpet to be cut in order to mount the rear brace. Template and instructions for download above.
- SEAT Leon III 3 DOOR
- SEAT Leon III 5 DOOR
- SEAT Leon III ST WAGON/VARIANT *4Motion wagon models only
- SEAT Leon FR III 2014-2020 5F
- SEAT Leon Cupra III 2014-2020 5F
- Skoda Octavia III 5 DOOR
- Skoda Octavia III WAGON
- Skoda Octavia III 5E 2014-2020 5E
- Skoda Octavia vRS III 5E 2014-2020 5E
IMPORTANT: Not to be used as a mounting point for seatbelts or race harnesses.
