Racingline High Output Ignition Coil Pack - MQB Style (Sold Individually)

RacingLine High-Output Ignition Coil Pack - MQB Style (Sold Individually)
RacingLine's Higher-Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils.10% more energy output than stock

The RacingLine Higher-Output Ignition Coils are a direct plug-and-play upgrade from the OE ignition coils. Whether an engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Ignition Coil Packs.
These deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either a stock or modified car.

Why have RacingLine settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply.
So at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line.

Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down.
Fitment couldn't be an easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher-Output versions.

Suitable for the following engines: 
- 1.8T EA888 Gen 3 (Requires 4x)
- 2.0T EA888 Gen 3 (Requires 4x)
- 2.0T EA888 Gen 3B (Requires 4x)
- 2.0T EA888 Gen 4 (Requires 4x)
- 2.5T EA855 EVO (Requires 5x)
- 2.9T EA839 (Requires 6x)
- 3.0T EA839 (Requires 6x)
These are sold indivually, so you will need to add the number required. 
If you are unsure which engine you have, please contact our team before purchasing.

Notes:
- Please use a small amount of silicone grease inside the rubber tube of the coilpack before installation.
- This will help with removal the next time you change your plugs.